C Adjust the paper guides to the paper size, and then gently insert paper face down into the bypass tray.

AYM004S

1.Extender

2.Paper guides

•Open out the extender to support paper sizes larger than A4 L, 81/2 ⋅11 L.

•If the paper guides are not flush against the paper, skewing and misfeeds might occur.

•Gently insert paper until it stops.

•Do not stack paper over the limit mark, otherwise a skewed image or mis- feeds might occur.

•Fan the paper to get air between the sheets to avoid a multi-sheet feed.

•When setting an OHP transparency, make sure that its front and back sides are properly positioned.

D Push down the paper guide release lever.

AYM005S

E Set the paper size using the printer driver or the control panel.

10