Using the Printer Function

G Click [Finish].

1

If the printer driver has already been installed, plug and play is enabled, and the icon of the printer connected to the “USB001” port is added to the [Printers] window.

H Install the printer driver. Click [Search for the best driver for your device. [Recom- mended]], and then click [Next >].

I Select the [Specify a location:] check box, and then click [Browse...]. The [Browse for Folder] dialog box appears.

J Insert the CD-ROM into the CD-ROM drive.

Note

❒When Auto Run starts, click [Exit].

❒To disable Auto Run, press the {Shift} key when inserting the CD-ROM into the drive and keep it pressed until the computer finishes reading from the CD-ROM.

K Specify the location where the source files of the printer driver are stored, and then click [Next >].

If the CD-ROM drive is D, the source files of the printer driver are stored in the following location:

•DDST

CD-ROM drive:\DRIVERS\DDST\WIN9X_ME\(language)\DISK1

•PCL 6

D:\DRIVERS\PCL6\WIN9X_ME\(Language)\DISK1

L Check the location, and then click [Next >].

Add Printer Wizard starts.

M Click [Finish].

Installation is complete. If installation is successful, the icon of the printer connected to the “USB001” port is added to the [Printers] window.

Note

❒The number after “USB” varies depending on the number of printers con- nected.

❒It is not necessary to reinstall USB Printing Support when connecting a dif- ferent machine via USB interface when USB Printing Support is installed.

❒After installing USB Printing Support, if the printer driver is not installed, follow the plug-and-play instructions of the printer.

28