
Using as a Windows Network Printer |
| |
E The software license agreement appears in the [License Agreement] dialog |
|
|
box. |
| |
After reading the agreement, click [I accept the agreement.], and then click [Next >]. |
| |
F Select the printer driver you want to use in the [Select Program] dialog box. |
| |
1 |
You can select several printer drivers.
G Click [Next >].
H Select the [Printer Name] check box to select the printer models you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
The details shown in [Comment], [Driver], and [Port] vary depending on the operating system, printer model, and port.
J Click [Port], and then click [Add].
K Click [Network Printer], and then click [OK].
L
M Select the printer you want to use, and then click [OK].
N Check that the port of the selected printer is displayed in [Port]. O Configure the user code as necessary.
For an RPCS printer driver, a user code can be set after the printer driver in- stallation. For information about user code, see the printer driver Help.
P Q
Select the [Default Printer] check box to configure the printer as default.
Click [Continue].
The printer driver installation starts.
R After the installation is completed, select one of the options to restart the computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒To stop installation of the selected software, click [Cancel] before installa- tion is complete.
❒Auto Run may not work with certain operating system settings. In that case, launch “Setup.exe” on the
37