Other Print Operations
Form Feed
This section gives instructions for operating the machine when there is no tray for the selected paper size or type, or when paper loaded in the machine has run out.
Important
❒The tray cannot be changed if the following functions are set:
• Duplex Print to a tray that does not support duplex printing
3 | • Staple |
|
Note
❒If form feed is selected for a tray with the following settings, you can change the tray by canceling the settings:
•Duplex Print
•Staple
❒If [Auto Continue] is selected, form fed paper is printed after a set interval. See “Printer Features”, General Settings Guide.
Printing from a Selected Tray
If the machine does not have a tray for the selected paper size or paper type, or if the selected paper loaded in the machine has run out, a caution message ap- pears. If this message appears, do the following procedure.
A When the caution message appears, press [FormFeed].
B On the confirmation screen, press {OK}.
If you want to stop printing, press [Cancel].
82