MAINTENANCE
WARNING:
When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.
WARNING:
Always release all pressure, disconnect from power supply, and allow unit to cool to the touch before cleaning or making repairs on the air compressor.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
Electric tools used on fiberglass material, wallboard, spack- ling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, com- mutators, etc. Consequently, we do not recommended using this tool for extended work on these types of materials. How- ever, if you do work with any of these materials, it is extremely important to clean the tool using compressed air.
REPLACING THE AIR FILTER
See Figure 14.
If you notice a reduction in performance of the air compres- sor, and the air delivery is lower than desired, it may be necessary to replace the air filter. A clogged air filter reduces performance and can cause increased wear.
nUnplug the air compressor. Allow the unit to cool for five minutes if needed.
nTo remove the old air filter, turn it counterclockwise.
nUsing a clean, dry cloth, wipe away any loose dirt or debris before reinstalling the new filter.
nInsert the new air filter and
AIR
FILTER
Fig. 14
16
