Removing Blade, See Figure | RIDGID R3200 instruction

REMOVING BLADE

Follow these directions to remove the blade.

■Unplug the saw.

CAUTION:

To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock.

■Depress spindle lock button.

■Remove blade screw by turning it counterclockwise with the wrench.

■Remove outer blade washer ("D" washer).

■Lift lower blade guard.

■Remove blade.

SPINDLE

LOCK

BUTTON

WRENCH

BLADE

SCREW

Fig. 3

Image 11

Contents

OPERATOR’S Manual Introduction Table of Contents Work Area General Safety RulesElectrical Safety Personal Safety Causes and Operator Prevention of Kickback Specific Safety RulesService Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION Symbols Electrical Connection SpecificationsElectrical Double Insulation Applications FeaturesUnpacking Features See Figures 2 and 2a AssemblyAttaching Blade See Figure Removing Blade Blade Guard System OperationSAW Blades See , 6, 7, Kickback STARTING/STOPPING the SAW Adjusting Blade Depth See Figures 11, 12, Operating the SAW See Figures 15 Cross CUTTING/RIP CuttingTo RIP CUT See Figures 17 To Adjust Bevel SettingBevel Cutting To Bevel CUT Length of CUT Scale Pocket Cutting Positive 0 Bevel Stop Adjustments Bearing Lubrication MaintenanceGeneral HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the Limited Three Year Warranty 4 in mm Circular Saw R3200 Double Insulated Customer Service Information