Removing Blade, See Figure | RIDGID R3210 specs

REMOVING BLADE

nUnplug the saw.

CAUTION:

To prevent damage to the spindle or spindle lock, always allow motor to come to a complete stop before engaging spindle lock.

nDepress spindle lock button.

nRemove blade screw by turning it clockwise with the hex wrench.

nRemove spring washer.

nRemove outer flange washer.

nLift lower blade guard.

nRemove blade.

Fig. 3

Image 13

Contents

Double Insulation Operators Manual Introduction Table of Contents Electrical Safety General Safety RulesPersonal Safety Work Area Service Specific Safety RulesCauses and Operator Prevention of Kickback Additional Safety Rules Symbol Name DESIGNATION/EXPLANATION Symbols Symbol Signal Meaning Double Insulation ElectricalElectrical Connection Extension Cords Features Features Instructions UnpackingPacking List Attaching Blade AssemblySee Figures 2 and 2a Spring Washer See Figure Removing BladeSpindle Lock Button Wrench Blade Screw Applications OperationSAW Blades Blade Guard System See Figures 5, 6, 7, Kickback Switch Trigger Elevation Bracket Depth Adjustment Lever Adjusting Blade DepthSTARTING/STOPPING the SAW See Figures 11, 12, Operating the SAWLine CUT Bevel Cutting Cross CuttingPositive 0 Bevel Stop To Check Positive 0 Bevel Stop To Adjust Bevel Setting To Adjust Positive 0 Bevel StopBevel Adjustment Lever See Figures 16 Pocket Cutting To Bevel CUTNotch Notch Lower Blade Guard General MaintenanceLength of CUT Scale Lubrication Brush ReplacementDIP Stick OIL Plug DAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the Limited Three Year Warranty HOW to Obtain Service What is not Covered Double Insulated 4 Worm Drive SAW