SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer.
SYMBOLNAME
VVolts
AAmperes
Hz Hertz
WWatt
min | Minutes |
| Alternating Current |
| Direct Current |
n o | No Load Speed |
| Class II Construction |
.../min | Per Minute |
| Wet Conditions Alert |
| Read The Operator’s Manual |
| Eye Protection |
| Safety Alert |
| No Hands Symbol |
| No Hands Symbol |
| No Hands Symbol |
| No Hands Symbol |
| Hot Surface |
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand operator’s manual before using this product.
Always wear safety goggles, safety glasses with side shields, or a full face shield when operating this product.
Precautions that involve your safety.
Failure to keep your hands away from the blade will result in seri- ous personal injury.
Failure to keep your hands away from the blade will result in serious personal injury.
Failure to keep your hands away from the blade will result in serious personal injury.
Failure to keep your hands away from the blade will result in serious personal injury.
To reduce the risk of injury or damage, avoid contact with any hot surface.
5
