OPERATION
SWITCH TRIGGER
See Figure 6.
To turn the drill ON , depress the switch trigger. Release switch trigger to turn the drill OFF
FORWARD/REVERSE SWITCH
See Figure 6.
The direction of chuck rotation is reversible and is controlled by a forward/reverse switch located on the handle of the drill.
NOTE: Do not change the direction of rotation while the drill is running. Release the switch trigger and allow the drill to stop before changing direction.
SPEED SELECTOR
See Figure 7.
The speed of the drill can be changed by turning the speed selector to LOW, MEDIUM or HIGH.
This drill features three speed settings for various applications:
nLOW (1) Speed (300/min.)
nMEDIUM (2) Speed (600/min.)
nHIGH (3) Speed (1200/min.)
CAUTION:
Never change gears while the tool is running. Failure to obey this caution could result in serious damage to the drill.
CLUTCH
This drill features a clutch that limits the amount of torque transferred to the user. With an excessive load, the clutch will slip and make a ratcheting sound. The clutch disengages the bit from the gear train to reduce the chance of damage to the tool or of causing the user to lose control.
NOTE: Do not continuously operate the tool when the clutch is slipping. Doing so will shorten the life of the tool.
SWITCH TRIGGER
FORWARD/REVERSE
SWITCH
Fig. 6
SPEED SELECTOR
LOW
MEDIUM
HIGH
Fig. 7
12
