Teac AG-D8850 owner manual Digital in terminals, Audio IN/OUT jacks, External in jacks, Video jack

ADIGITAL IN terminals

Used for the input of digital audio signals. Connect these digital input terminals to the appropriate digital output terminals of the digital audio source unit such as a DVD or CD player. Use a good quality RCA coaxial cable or optical digital cable.

<When inserting the plug of the optical cable, the protective shutter of the terminal will open and you should hear it click into position when fully inserted. Be careful that you do not force the plug, because this could result in damage to the protective shutter, the cable, or the unit itself.

BAUDIO IN/OUT jacks

Analog 2-channel audio signal is input or output from these jacks. Connect the component with commercially available RCA cables.

Make sure to connect:

white plug q white jack (L: left channel)

red plug q red jack (R: right channel)

CEXTERNAL IN jacks

If your DVD player or decoder has 6-channel analog audio outputs, connect them with good quality RCA cables.

DVIDEO jack

Connect the component with a high quality RCA cable designed for video applications.

EAC OUTLET (switched)

Not available for Australian model.

This outlet is active only when the unit is on.

Caution:

Make sure that the total power consumption of all equipment connected to the outlet does not exceed 100 watts or 500 mA.

FAC Power Cord

After all other connections are complete, connect the plug to the AC wall socket.

Be sure to connect the power cord to an AC outlet which supplies the correct voltage.

Hold the power plug when plugging or unplugging the power cord. Never pull or yank on the power cord.

7