Sunbeam GR8410, GR8400, GR8210 Before using your Café Press/Grill, Using your Café Press/Grill

Using your Sunbeam Café Press/Grill.

Before using your Café Press/Grill

Before using your Café Press/Grill for the first time, the non-stick cooking plates must be seasoned. Turn the power ON and pre-heat your Café Press/Grill until the Ready Light illuminates.

Wipe a small amount of butter onto the plates, rub lightly and wipe away any excess.

Note: When using your Café Press/Grill for the first time you may notice a fine smoke haze being emitted from the unit. This is normal. It is due to the initial heating of internal components.

Using your Café Press/Grill

1.Plug the power cord into a 230-240 volt AC power outlet.

2.Turn the power ON and pre-heat your Café Press until the Ready light illuminates.

3.Once you have prepared your snack, place the bread onto the cooking plate.

4.Gently lower the lid by pulling down the cast metal arms. The café-style floating hinge system will adjust automatically ensuring that the top cooking plate lies evenly on your snack, for perfect toasting every time.

Note: Ensure that the cord is kept well away from the cooking plates when in use.

5.Allow your snack to toast for approximately 3 minutes, depending on the bread, filling and personal taste. Your Café Press/Grill toasts both sides of bread at the same time.

6.The cooking plates are coated with a durable non-stick coating. Some fillings such as cheese may melt and cause the sandwich to stick to the cooking plates. To free the sandwich use a plastic spatula or wooden spoon. Never use a sharp or metal object, as this will damage the non-stick surface.

Note: The ‘warm up’ and ‘ready’ lights are thermostatically controlled and will cycle during cooking to ensure that the correct temperature is maintained.

7.After you have completed using your Café Press/Grill, turn the power OFF.

5