Power consumption, Format, Signal format | JVC 0797TOV*UN*VP

SPECIFICATIONS					EN 81
CAMCORDER
General
Power	: DC 6.3 V				(using AC Adapter)

	DC 7.2 V				(using Battery)

Power consumption	: 6.2 W (viewfinder on), 7.0 W (LCD monitor on)
Format	: DV Format (SD mode)
Signal format	: PAL Standard
Video signal recording format	: Digital Component Recording
Cassette	: MINI DV Cassette
Tape Speed	: SP: 18.8 mm/sec.
	LP: 12.5 mm/sec.
Maximum recording time	: SP: 60 min.
	LP: 90 min. (using DVM-60 cassette)
Pickup	: 1/3" CCD
Lens	: F1.6, f = 4.5 to 45 mm, 10:1 Power Zoom Lens
Filter diameter	: ø27 mm
LCD monitor	: 2.5", 180,000 pixel polysilicon TFT/LCD panel
Viewfinder	: 0.55" colour LCD
Operating temperature	: 0 to 40°C
Operating humidity	: 35 to 80%
Storage temperature	: –20 to 50°C
Dimensions	: 49 (W) x 131 (H) x 93 (D) mm
Weight	: Approx. 590 g (incl. cassette and battery)
Video
Output	: 1 Vp-p, 75 Ω unbalanced, analogue output
	(via ø3.5 mm AV output jack)
Audio
Output	: –8 dBs, 1 kΩ analogue output
	(via ø3.5 mm AV output jack)
Headphone	: stereo
	(via ø3.5 mm AV output jack)
External microphone input	: –62 dBs, high impedance unbalanced with
	ø3.5 mm (STEREO)
Speaker	: 20 mm round x 1, monaural
AC ADAPTER/CHARGER
Power	: AC 110–240 V`, 50/60 Hz
Power consumption	: 20 W
Output power	: DC 7.2 V			, 0.75 A (charge)

	: DC 6.3 V			, 1.8 A (VTR)

Operating temperature	: 0°C to 40°C (when charging, 10°C to 35°C)
Dimensions	: 94 mm (W) x 36 mm (H) x 122 mm (D)
Weight	: Approx. 380 g

*Specifications shown are for SP mode unless otherwise indicated. E & O.E. Design and specifications subject to change without notice.

Image 81

JVC 0797TOV*UN*VP Power consumption, Format, Signal format, Video signal recording format, Cassette, Tape Speed, Lens

Contents

GR-DVX Dear Customer It is recommended that youConnection to the mains supply in the United Kingdom Some DO’S and DON’TS on the Safe USE of Equipment Safety Precautions Sub-Code Area Video Area Audio AreaITI Insert and Tracking Information Area DC cord EN P Rovided a CCE Ssories Lithium battery CR2025 Remote control unit RM-V711UFor remote control unit DV30ME Detach BATTERY/BATTERIES Charging The Battery PackAttach Detach Open Battery Cover Installing The Battery PackInsert Battery Close Battery Cover First. Close the battery cover Supply PowerAttach to Camcorder Knob and insert Select Operation Mode Date/Time SettingsInput Date and Time LCD monitor Loading/Unloading a Cassette OPEN/EJECT switchOpen Cassette Cover INSERT/REMOVE Tape Recording Mode Setting SET Recording ModeSet depending on your preference PUT Camcorder Attach Hand StrapClose Flap During transporting Grip Strap Attachment Adjust LengthTripod Mounting Attach Grip Strap to Hand Strap Eyelet Dioptre Adjustment Adjust DioptreTurn on Camcorder Installing The Battery Remote Control UnitPull OUT Battery Holder Insert Battery in Holder Power Dial Position Function Operation Mode Pull OUT Viewfinder or Open LCD Monitor Basic RecordingStart Recording Stop Recording Engage Still Mode Recording From The Middle Of a TapeStart Search Time Code When blank portion is recorded on a tapeProper recording During shooting Adjust Brightness Tape Remaining IndicatorBrightness Control Brightness indication appears in the LCD monitor Interface Shooting Journalistic shootingOpen LCD Monitor Tilt LCD Monitor Zoom RE COR DIN G Changing the Snapshot Setting Motor Drive modeSnapshot Take Snapshot Select Function Snapshot Flash Auto Flash Select Mode Adjusting Flash BrightnessAccessmenu Manual Mode Item Access Flash Adjustment Dissolves during 5 second mode recording Engage 5S ModeTo Take a Snapshot In The 5-Second Mode Scene 5-second recording Stop SELF-TIMER Recording Self-TimerEND SELF-TIMER Recording To Take a Snapshot In The Self-Timer Mode Close Recording Menu MenusRecording Menu allows you to set these functions Please refer to page 31, 32 for details Wide Mode REC Mode Recording mode Zoom Zoom magnification DIS Digital Image StabilizerFlash pg Displaying The Date And Time During Recording Access System Menu System MenuClose System Menu Return Sound signals can be sampled at 32 kHz or 48 kHz To Cancel FADE/WIPE Effects Access FADER/WIPE MenuFADE/WIPE Effects Select Effect Example WH Fades and WipesExample Fader White Picture Wipe/Dissolve Resume RecordingP and P of the Fader/Wipe Menu Random Variations Fade in or out with a black screen Fade in or out with a white screenFade out from colour to black and white Fade in or out with a full-screen mosaic effect Disappears New scene gradually appears as the old one graduallyNew scene wipes in over the previous one from the upper Right corner to the lower left corner AE/Effects Disable P.AE/EFFECT Strobe Classic FilmTwilight Sepia Access Manual Focus Manual Focus AdjustmentAdjust Focus To Change To Auto Focus Exposure Control Adjust ExposureBrightness control of the LCD monitor To Return To Automatic Exposure Control Iris Lock After , adjust the exposure rotatingTo Return To Automatic Iris Control Iris Accessment White Balance Adjust White Balance AdjustmentClosement White Balance Adjust Select Auto in . Or set the Power Dial to Exit Manual White Balance Adjustment Enter SettingManual White Balance Operation To Change The Tint For Recording Rewind Tape Volume switchViewing Recording END Playback Activate Zoom Playback ZoomLocatescene Portion of Magnified END Zoom Select P.AE/EFFECT Playback EffectsRM-V711U Start Playback Press the Play button Playback Menu Access Playback MenuClose Menu Playback Menu allows you to set the following functions Playback Sound Displaying the Date During PlaybackDisplaying The Time Code During Playback Turn on Power VCR/TV Connection when connecting directly to the camcorderSelect TV’S Video Mode Turn the Power Dial to Play and turn on the TV/VCR VCR/TV Connection using Docking Station Confirm POWER-OFF Status Supply PowerAttach and Locks Video OUT VCR/TV connection using the Docking Station Equipped with an S-VIDEO Connection to a TV or VCRAnd/or A/V input RCA Connect Docking Station to TV or VCR Make Connections Start Playback DubbingPause Recording VCR Recording deck Brand Setting Operate the VCR VCR Code ListRM-V711U 9 ` provided Make Connections Random Assemble EditingStart Source Playback Execute FADE/WIPE in if Necessary SET EDIT-OUT Point SET EDIT-IN PointUSE Fade Wipe on Scene Transition if Necessary USE P.AE/EFFECT if Necessary Start Editing Engagemode Vcrs RECORD-PAUSEStop Editing Button For More Accurate Editing Prepare for R.A. Edit Play Back Dubbed SceneChoose a Scene Input Correction Data Adjustment of VCR‘s against Camcorder Timing Find EDIT-IN Point Audio DubbingBegin Dubbing Pause During Dubbing Find Edit OUT Point Insert EditingFind Edit in Point Pause During Editing 5S or Battery pgTape END appears Replace with new cassette EN TR Ouble Shooting Picture Wipe function doesn’t work Squeeze or Cinema mode is selected in the Recording Menu End of its service life, images Same time Cleaning The Camcorder Camcorder Power dial pg OPEN/EJECT switch pgRBATTERY cover pg IND.ON/OFF button pg Docking Station Function LCD Monitor/Viewfinder Indications During RecordingAppears during recording Appears while the tape is running Brightness of the flash LCD Monitor/Viewfinder Indications During Playback Indications Function Avoid using the unit For safety, do notTo avoid hazard To prevent damage to the camcorder Do not leave the unit To prolong service lifeTo protect the unit, do not To prevent damage to the LCD monitor, do not Power consumption PowerSignal format Video signal recording format AC Adapter Colour temperatureAuto focus On-screen display Lithium Battery Pg , 4 Second Mode Fade-In/OutMotor Drive Mode Animation Audio Dubbing GR-DVX