10EN | GETTING STARTED (Cont.) |
Indoor Use | Using The Power Pack |
When using the camcorder indoors, you can use the AC Adapter instead of a battery.
For extended use, prepare the Power Pack, which can be loaded with two battery packs.
To AC outlet
Power lamp When power is supplied, the power lamp lights.
DC cord
Core Filter 
Power cord
AC Power Adapter/Charger
Connector is under this cover
mark
Knob
Battery cover
DC input jack
DC cord
Screw
INSERT BATTERY |
|
1 Open the battery cover while pressing the | |
knob and insert the | end of the battery |
first. Close the battery cover.
2 ATTACH TO CAMCORDER
Attach the camcorder to the Power Pack in the direction of the arrow. Turn the
1 SUPPLY POWER TO ADAPTER Plug the AC Adapter/Charger’s power cord in to an AC outlet.
2 SUPPLY POWER TO CAMCORDER Connect the AC Adapter to the camcorder.
NOTE:
When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves perform- ance of equipment.
3 SUPPLY POWER
Connect the Power Pack DC cord to the camcorder DC input jack.
NOTES:
●When the battery remaining power indicator
appears as 
, that means the battery power is close to nil. When the battery power is exhausted, power turns off automatically.
●When using the Power Pack, the battery pack installed in the camcorder does not supply power.
●After the battery packs in the Power Pack are exhausted, the battery pack in the camcorder does not begin to supply power. Detach the Power Pack and turn off the camcorder to use the battery pack installed in the camcorder.
