JVC 0797TOV*UN*VP For More Accurate Editing, Diagnosing VCR’s against Camcorder Timing, RM-V711U

EN 63

For More Accurate Editing

Some VCRs make the transition from Record-Standby to Record mode faster than others. Even if you begin editing for the camcorder and the VCR at exactly the same time, you may lose scenes you wanted, or find that you’ve recorded scenes you didn’t want. For a cleanly edited tape, confirm and adjust the timing of the camcorder against your VCR.

Diagnosing VCR’s against Camcorder Timing

VCR (Recording deck)

Program 1

	IN	OUT	MODE
1	– – – – : – – ~

2~

3~

4~

5~

6~

7~

8~

TIME CODE	– – : – –
TOTAL	0 0 : 0 0

Random Assemble Editing Menu

Remote sensor

RM-V711U

T W (provided)

R.A.EDIT ON/OFF

1

2

PREPARE FOR R.A. EDIT	3	PLAY BACK DUBBED SCENE
Play back the tape in the camcorder, then point
		•If any images from the scene prior to the
the remote control at the camcorder's remote
sensor and press R.A. EDIT ON/OFF.		transition you chose for your Edit-In point
		were recorded, that means your VCR moves
•“Random Assemble Editing Menu” appears		quickly from Record-Pause to Record mode.
on the TV screen.		•If the scene you tried to dub starts in
		progress, the VCR is slow to start recording.
CHOOSE A SCENE
Perform Random Assemble Editing on Program		CONTINUED ON NEXT PAGE
1 only. In order to check VCR and camcorder

timing, select the beginning of a scene transition as your Edit-In point.