JVC LYT0002-0V4A System Menu, 34EN, RECORDINGAdvanced Features Cont, Select Operation Mode

34EN

RECORDINGAdvanced Features (Cont.)

System Menu

The System Menu allows you to set the following functions: Photo Frame, Scene, Beep/Tally, Wind Cut, Sound Mode and ID numbers.

Display

REC MODE	SP
WIDE MODE	OFF
ZOOM	20X
DIS	ON
GAIN UP	AGC
FLASH	AUTO

TO DATE / TIME MENU

4TO SYSTEM MENU

END

Recording Menu

PHOTO FRAME	ON
SCENE	5S
BEEP / TALLY	ON
WIND CUT	OFF
SOUND MODE	32kHz
ID NUMBER	06

4RETURN

System Menu

MENU

Lock button

Power Dial

5S
M	OFFYA
A		P
	L

Select Dial

MENU button

1 SELECT OPERATION MODE

First turn the Power Dial to “ M ” while pressing down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESS RECORDING MENU Press MENU. The Recording Menu appears.

3 ACCESS SYSTEM MENU

Move the pointer and highlight bar to “TO SYSTEM MENU” by rotating the Select Dial, then press it. The System Menu appears.

4 SELECT FUNCTION

Place the pointer and highlighlt bar to the desired function by rotating the Select Dial, then press it. The pointer stops blinking, indicating that the function has been selected.

5 SET FUNCTION PARAMETERS Rotate the Select Dial to cycle through the available settings for the selected function, and stop when the desired setting appears. Then press it, and the pointer and highlight bar automatically move to “RETURN”.

•To set the parameters for a different function, repeat steps 4 and 5.

6 CLOSE SYSTEM MENU

Press the Select Dial twice. Setting is complete and the System Menu disappears.