JVC 0797TOV*UN*VP Connection to a TV or VCR, equipped with an S-VIDEO, IN and/or A/V input RCA

							EN 57
3		AC Power Adapter/Charger				Connection to a TV or VCR
						equipped with an S-VIDEO
						IN and/or A/V input (RCA
To DC						type) connectors
			To DC
input jack
			output jack
		DC cord
	Core filter
			Core filter
			To S-VIDEO	S-VIDEO cable (provided)
			output jack	To S-VIDEO input jack
						To
			To AUDIO input jacks (L/R)		Red	TV or VCR
					White
		To AUDIO			Yellow		VCR
					To VIDEO
		output jacks (L/R)
				VIDEO/
					input jack
				AUDIO cable
		Red
				(provided)
		White
		Yellow	Core filter
	To VIDEO output jack			(connect when the S-VIDEO cable is not used)

1 CONNECT DOCKING STATION TO TV OR VCR

Connect as shown in the illustration 1, 2 or 3 (☞ pg. 56, 57).

If Using A VCR . . . go to step 2.

If not . . . go to step 3.

2 CONNECTINPUT VCR OUTPUT TO TV

Refer to your VCR’s instruction manual.

3 TURN ON POWER

4 SELECT TV’S VIDEO MODE

Set the TV to the channel or mode appropriate for video playback.

NOTES:

●When using the provided VIDEO/AUDIO cable (Docking Station to TV or VCR), DC cord, S- VIDEO cable or editing cable, make sure you connect the end of the cable with the core filter to the Docking Station. The core filter improves performance of equipment.

●If TV/VCR is equipped with only one audio connector, use a conversion plug (commercially available).

●Set the VIDEO OUT select switch of the cable adapter as required:

Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an S-VIDEO cable. CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/ video cable.

●To turn off the speaker’s sound, ☞ pg. 49.