EN 69
SYMPTOM | POSSIBLE CAUSES | CORRECTIVE ACTION |
19.The Picture Wipe and Dissolve functions don’t work.
19.•The last selected editing scene is ending.
•At the end of the last selected scene for editing, the Power Dial was set to “OFF”.
•The power is off.
19.•Select Picture Wipe or Dissolve before beginning recording. The effects are then automatically
activated (☞ pg. 38). •Do not turn off the
camcorder’s power after setting
•The camcorder automatically shuts off after 5 minutes have elapsed in the Record- Standby mode. Make sure you continue operations within
5 minutes after engaging Record-Standby mode (☞ pg. 38).
20.The Picture Wipe function doesn’t work.
20.•The Slow (Slow Shutter) effect is activated.
•The Squeeze or Cinema mode is selected in the Recording Menu.
20.•Make sure the Squeeze mode, Cinema mode, or Slow effect is not activated when preparing to use the
Picture Wipe function (☞ pg. 31, 43).
21.Even when Slow (Slow Shutter) isn't selected, the image looks like it is activated.
21.•When shooting in the dark with GAIN UP set to A
, the unit becomes highly sensitive to light and the image takes on an effect similar to Slow (Slow Shutter).
21.•If you want the lighting to look more natural, set GAIN UP to “AGC” or
“OFF” in the Recording Menu (☞ pg. 32).
22.The Video Echo effect doesn’t work.
22.•The Picture Wipe or Dissolve functions are in use.
•The Squeeze mode is selected in the Recording Menu.
•Snapshot Dissolve is in progress.
•A
22.•Make sure the Squeeze mode is set to “OFF”
(☞ pg. 31).
•Do not try to use the Video Echo effect during a
(☞ pg. 36).
23. There is no strobe when |
| 23. •The Picture Wipe or |
| 23. •Do not try to use the |
the Classic Film and |
| Dissolve functions are in |
| Classic Film or Strobe |
Strobe effects are |
| use. |
| effects during a scene |
activated. |
| •Snapshot Dissolve is in |
| transition (☞ pg. 43). |
|
| progress. |
|
|
24. White Balance cannot be |
| 24. •The Sepia or Monotone |
| 24. •Turn off Sepia or Monotone |
activated. |
| effects are activated. |
| before setting White |
|
| •Snapshot Dissolve is in |
| Balance (☞ pg. 42). |
|
| progress. |
| •Wait until the Snapshot |
|
|
|
| Dissolve is finished before |
|
|
|
| setting White Balance |
|
|
|
| (☞ pg. 25). |
|
|
|
|
|
|
|
|
| CONTINUED ON NEXT PAGE |
