Teac AG-D8850 Front Panel and Remote Control Unit, Apower, Bstandby/On, Cdigital Inputs, Ifm/Am

Front Panel and Remote Control Unit

APOWER

Press this switch to turn the unit standby or off.

The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position.

BSTANDBY/ON

When the POWER switch of the main unit is depressed, use this button to turn the unit on or standby.

CDIGITAL INPUTS

Use this button to select one of the digital input terminals.

DSTANDBY indicator

This indicator lights when the unit is in the standby mode. When the unit is turned on, it goes off.

ERemote Sensor

When operating the remote control unit, point it towards the remote sensor.

FINPUT SELECTOR (VIDEO, AUDIO) Use these buttons to select a source.

GDisplay

HEXTERNAL IN

Use this button to select the source connected to the EXTERNAL IN jacks.

IFM/AM

Use this button to select band and FM mode.

JAUTO/MANUAL

Use this button to change the decoding mode of digital signals.

KSURROUND ( / )

Use these buttons to select a surround mode.

LSTEREO

Use this button to select stereo mode. Sound is output only from the front speakers (and the subwoofer).

MMASTER VOLUME

Turn this knob (or press the VOLUME buttons of the remote control unit) to adjust the master volume.

NVIDEO 3 INPUT jacks

You can connect a component such as a portable CD, game player, etc. to these jacks.

OPRESET (‡/°)

In the preset tuning mode, use these buttons to select a preset channel.

PTUNING (‡/°)

In the manual tuning mode, use these buttons to tune in a station.

QMEMORY/ENTER

Use this button to store speaker settings and preset channels into memory.

RCHANNEL LEVEL

Use this button to enter the channel level setting mode.

SSETUP

Use this button to enter the setup menu.

TSELECT (g/t/5/b)

Use these buttons to select and adjust the setting options in each menu.

UDISPLAY

Use this button to change the display mode or to select RDS functions in FM mode.

VSPEAKER indicator

This indicator lights when the SPEAKER ON/OFF button is set to ON.

WSPEAKER ON/OFF

Use this button to turn on or off the speakers.

ON: Sound is output from the speakers.

OFF: No sound is output from the speakers.

XPHONES

For private listening, insert the headphones plug into this jack, and adjust the volume by turning the MASTER VOLUME knob.

13