Preset Tuning
You can store up to 30 stations.
Presetting Stations
1Tune in a station you want to listen to (see page 24).
2Press the MEMORY/ENTER button.
3While the “MEM” indicator is blinking, select a preset channel to store the station using the PRESET buttons, and then press the MEMORY/ENTER button.
You can also use the numeric buttons of the remote control unit to select a preset channel.
Example:
To select channel No. 3:
To select channel No. 6:
To select channel No. 16: 
To select channel No.16 for example, press “1”, and within 2 seconds press “6”.
To select channel No.1, 2 or 3, press “0” and then the number (1, 2 or 3). As an example, to select number 3, press “0” and “3”. (Optionally, you may press just the number “3” and then wait a few seconds.)
To select channel No.4 through 9, simply press the appropriate button (4 through 9).
When using the numeric buttons, the station is stored automatically without pressing the MEMORY/ENTER button.
To store more stations, repeat steps 1 to 3 .
How to select preset stations
Press the PRESET buttons repeatedly until the desired preset station is found.
<You can also use the numeric buttons to select a preset channel.
Scanning preset stations
Press the PRESET SCAN button of the remote control unit. Preset stations stored in memory are scanned at 5 seconds intervals.
When the station you want to listen to is found, press the PRESET SCAN button again to stop scanning.
25
