Test Tone
Balancing relative volume between speakers using Test Tone
The test tone function is useful to adjust the relative volume between speakers.
Once the balance is set, you don’t have to change the balance as long as the speakers aren’t moved.
< It is also possible to adjust the relative volume during playback of DVD.
< Use the remote control from your listening position.
< The TONE button will not work when the SPEAKER ON/OFF button is set to off. In that case, press the SPEAKER ON/OFF button to turn the speakers on.
< The TONE button will work when EXTERNAL IN or STEREO is selected.
1 Press the TONE button.
The test tone is emitted from each speaker in the following order at
Front Left 
Center 
Front Right
Subwoofer 
Rear Left 
Rear Right 
<If certain speakers are not being used, (for example, no center speaker) the noise sequencer will automatically skip over that channel.
2Adjust the master volume to the normal listening level.
3Adjust the volume of each speaker so that the test tone from each speaker sounds the same.
<Select the channel you want to change the level by pressing the SELECT buttons (g/t), then adjust the level by pressing the SELECT buttons (5/b).
<The level can be adjusted in 1 dB steps from
4When the setting has been finished, press the TONE button to stop the test tone.
33
