Teac AG-D8850 owner manual Setup, Use the Select buttons 5/b/g/t to navigate the menus

Setup

The setup menu appears on the front panel’s display and allows you to perform the setup procedures easily. In most situations, you will only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.

The setup menu consists of 5 main menus; SYSTEM, INPUT, SPK SET, CH LEVEL and PARAMTR. These menus are then divided up into various sub-menus.

1Turn on the main unit during standby.

2Press the SETUP button to enter the setup menu.

“SYSTEM” appears on the front panel display.

<To exit the setup menu, press the SETUP button again.

3Use the SELECT buttons (5/b/g/t) to navigate the menus.

<Refer to the Setup Menu Chart on the next page.

4Press the ENTER button to confirm the entry.

<When a numerical value (such as speaker distance) is changed, the value is confirmed without pressing the ENTER button.

<Individual menu functions are described on pages 30-33.

<Repeat steps 3 and 4 as required.

5Exit the setup menu by pressing the SETUP button once more.

28