FEATURES
SPECIFICATIONS
Chuck | 1/2 in. (13 mm) Keyless |
Motor | 18 Volt DC |
Switch | Variable Speed |
Gear Train | 2 Speed |
No Load Speed |
|
Drill Speed | |
Hammer Speed | |
Clutch | 24 Positions |
Charger Input | 120 V, 60 Hz, AC only |
Charge Rate | 30 minutes |
Torque | 485 in. lb. |
Before using this tool, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless.
This new hammer drill is equipped with the following features. See Figure 1.
KEYLESS CHUCK
The hammer drill has a keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws.
SWITCH
The hammer drill has a conveniently located variable speed switch.
SWITCH LOCK
The switch trigger can be locked in the OFF (Center Lock) position. This feature helps reduce the possibility of accidental starting when not in use.
TWO SPEED GEAR TRAIN
The hammer drill has a
AUXILIARY HANDLE
This drill is equipped with an auxiliary handle for ease of operation and to prevent loss of control.
DEPTH GAGE ROD
A depth gage rod has been supplied with your hammer drill to assist in controlling the depth of drilled holes.
BIT STORAGE
When not in use, bits provided with the hammer drill can be placed in the storage area located on the rear of the motor housing.
CHARGER
The dual port charger
FORWARD/REVERSE SELECTOR
(DIRECTION OF ROTATION SELECTOR)
The hammer drill has a forward/reverse selector located above the switch trigger.
7
