OPERATION
TO INSTALL BATTERY PACK
See Figure 6.
nPlace battery pack in the saw. Align raised rib on battery pack with the groove inside the saw.
nMake sure the latches on each side of your battery pack snap in place and battery pack is secured in the saw before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the saw and latches into place properly. Improper installation of the battery pack can cause damage to internal components.
TO REMOVE BATTERY PACK
See Figure 7.
nLocate latches on side of battery pack and depress to release battery pack from the saw.
nThe battery pack will automatically disconnect in direction to be removed when buttons are depressed.
nRemove the battery pack from your saw.
BATTERY PACK
Fig. 6
BATTERY 
LATCHES
Fig. 7
13
