LG Electronics PA49, PA65, PA45 Step of using the Pentouch, Installing the Pentouch Program

			PENTOUCH 39
yyWhen multiple people use the touch pen and			Recommended System Requirements for
	cradle, make sure that sufficient space is	Pentouch
	available. Collisions can cause injury or failures.
		yyCPU: Dual-Core 2GHz or better
		yyMemory: 1GB or more
		yyHDD: 500MB or more
		yyDisplay: Graphics card with 1024x768 via an
Step of using the Pentouch			RGB or HDMI output port
		yyWindows 7 is recommend due to its support
program
			of multi-touch.
Follow the steps below to use the Pentouch func-			NOTE
tion.			yyYou must log in as an administrator to
1			install or remove the included software.
	Check the system requirements before		yyMake sure to install the drivers found on
	installation.		the CD provided.
2	Install the Pentouch program from the		yyYou can also download this program
			from the LG Electronics website.
	installation CD.
			yyMake sure to close all running
3	Pair the pen and the dongle.		applications before installing the drivers.
4	Connect the PC and the TV.		yyRemove old version of the Pentouch
			program installed on your PC before re-
5	Configure the PC screen.		installing or installing new version.
6	Activate the Pentouch mode on the TV.	Installing the Pentouch Program
7	Start the Pentouch program.	Follow the steps described in this manual to install
		the program.

ENGLISH

System Requirements

Make sure that the drivers are installed properly to allow proper operation of the touch pen.

yyWindows 7 Starter Edition is not supported.

Supported Operating System

Windows XP	32 bit
Windows Vista	32 bit
Windows 7	64 bit

1Prepare your computer and start it.

2After the computer starts, insert the CD provided. The installation screen appears automatically.

(If the installation screen is not displayed automatically, access My computer and then click LG and index.htm to view the installation screen.)

3Click [Install the Pentouch Program] in the installation window.

The default folder is used for installation.

A window appears to indicate that the installa- tion was completed successfully.

4In Windows XP, the [Found New Hardware Wizard] installs your driver automatically.

5Restart your computer after the installation.

NOTE

yyDisconnect the USB dongle first to install the program.