INSTALLATION REQUIREMENTS

Tools andParts

Gather the required tools and parts before starting installation. The parts supplied are in the washer basket.

Tools needed for connecting the drain hose and water inlet hoses:

■ Pliers that open to 1⁹⁄₁₆"

■ Flashlight (optional)

(3.95 cm)

 

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record hose installation or replacement dates for future reference.

Parts supplied:

ABC

D

A. Drain hose form

B. Water inlet hoses (2)

C. Flat water inlet hose washers (4)

D. Beaded tie strap

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the “Assistance or Service” section.

If You Have:

You Will Need to Buy:

Laundry tub or

Sump pump system (if not already

standpipe taller

available)

than 96" (2.4 m)

 

 

 

1" (2.5 cm)

2" (5 cm) diameter to 1" (2.5 cm)

diameter standpipe

diameter standpipe adapter,

 

Part Number 3363920 and connector kit

 

Part Number 285835

 

 

Overhead sewer

Standard 20 gal. (76 L) 39" (99 cm) tall

 

drain tub or utility sink, sump pump and

 

connectors (available from local

 

plumbing suppliers)

 

 

Floor drain

Siphon break, Part Number 285834;

 

additional drain hose,

 

Part Number 8318155 and connector kit,

 

Part Number 285835

 

 

Water faucets

2 longer water fill hoses:

beyond reach of fill

6 ft (1.8 m) Part Number 76314,

hoses

10 ft (3.0 m) Part Number 350008

 

 

Lint clogged drain

Drain protector, Part Number 367031

 

 

Tools needed for securing the drain hose and leveling the washer:

■

Adjustable or open end

■

Wood block

 

wrench ⁹⁄₁₆" (14 mm)

■

Ruler or measuring tape

 

Level

■

 

 

4

Page 3 Page 5
Page 4
Image 4
Whirlpool W10113000A manual Installation Requirements, Tools andParts, Parts supplied, Alternate Parts
Page 3 Page 5
Top Page Image Contents