4-18Installing Hardware Options

9.Reconnect the SCSI cables on the back of the drive cage. Refer to Figure 4-19 connector identification. Refer to Cabling Guidelines for Compaq ProLiant 3000 Servers for information on SCSI cabling.

 

Hard Drive Backplane Connector

SCSI Input 1

SCSI Input 0

Removable Media Connector

Figure 4-17.Connectors on back of drive cage

10.Pull out the drive cage latch and push the drive cage back fully until the drive cage latch can be pushed into place.

11.Tighten the thumbscrews on the front of the drive cage.

12.Connect SCSI controller cables. See Cabling Guidelines for Compaq ProLiant 3000 Servers for more information on connecting SCSI cables. Figure 4-18 shows an example controller connection.

Page 79
Image 79
Compaq 3000 manual 18Installing Hardware Options, Connectors on back of drive cage