Compaq 3000 manual Scsi ID Numbers

4-25

SCSI ID Numbers

There are four possible numbering schemes depending on whether you are using 1-inch height drives, 1.6-inch height drives, simplex controller, or duplex controllers. The following four figures illustrate these four schemes.

IMPORTANT: The Simplex Enable board must be installed on the back of the drive cage for the simplex modes and the Duplex Enable board must be installed for the duplex modes.

3	Not Used
2	6
1	5
0	4

Figure 4-23.SCSI ID numbers - Single SCSI Channel (Simplex Mode) with 1-inch drives

ProLiant 3000 Setup and Installation Guide