Compaq 3000 manual Starting the System Configuration Utility

5-5

Starting the System

Configuration Utility

To start the Compaq System Configuration Utility for the first time, refer to the

SmartStart Installation poster.

After the first time, access the System Configuration Utility as follows:

1.Press the Ctrl+Alt+Del keys to reboot the server.

2.When the following prompt appears at the top of the screen during Power-On Self-Test (POST), press the F10 key. The System Configuration Utility main menu displays the following:

Press "F10" key for System Partition Utilities

IMPORTANT: The text appears for only two seconds. If you do not press

F10 during this time, you must reboot the server.

ProLiant 3000 Setup and Installation Guide