5-18 Server Configuration and Utilities
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1.Insert the Compaq SmartStart and Support Software CD into the CD- ROM drive.
2.Boot your system.
3.Select Non-SmartStart Setup.
4.Follow the instructions that display on the monitor.
IBM OS/2 Device Drivers from Compaq
Your server must have certain device drivers for some server options to operate using IBM OS/2 Warp Server 4.0, IBM OS/2 Warp Server 4.0 SMP, OS/2 Warp, OS/2 Warp Connect 3.0, and OS/2 2.x. These drivers are located on the Compaq SmartStart and Support Software CD you received with your server. If you use SmartStart to install your operating system, these drivers are loaded automatically. Otherwise, you can use SmartStart to create an OS/2 Support Software Diskette (SSD) from Compaq to support a manual installation of OS/2.
For more information on these drivers, run the README.COM file in the root directory of the OS/2 SSD from Compaq.
Manual installation
If you choose not to let SmartStart configure the server, follow this procedure:
1.Insert the Compaq SmartStart and Support Software CD into the drive.
2.Boot your system.
3.Select Non-SmartStart Setup.
4.Follow the instructions that display on the monitor.
