Compaq 3000 manual Installing Hardware Options

4-1

Chapter 4

Installing Hardware Options

This chapter is divided into two major parts as follows:

■Accessing Non Hot-Plug Areas - you must shut down the server power in order to install options, upgrades or replacements in the following areas:

❏Processor boards and sockets

❏Memory board and sockets

❏System Board

❏Drive Cage Backplane Board

❏Power Supply Backplane Board

❏Three shared PCI/EISA slots

❏Five PCI slots

❏Fans

■Accessing Hot-Plug Areas - you can install hot-plug options, upgrades or replacements without shutting down the power in the following areas:

❏SCSI drive bays

❏Power supplies

NOTE: The illustrations in this chapter may vary slightly depending on whether you have a tower model or rack model.

ProLiant 3000 Setup and Installation Guide