w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Figure 5-2. Installing and Removing the Bezel

release latch (2)

bezel

To replace the bezel, push the latches inward, place the bezel on the front of the system and release the latches.

Opening the System

1Observe the precautions in "Safety First—For You and Your System."

2Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

3To remove the system cover, loosen the two captive screws at the back of the system. See Figure 5-3.

4While pressing down on the cover indention, slide the cover backward about an inch, and grasp the cover on both sides.

5Carefully lift the cover away from the system.

42

Troubleshooting Your System

Page 42
Image 42
Dell 745N manual Opening the System, Installing and Removing the Bezel Release latch