Dell 745N - page 70

70 Installing System Components
www.dell.com | support.dell.com
a Push the bezel release latches inward.
b Pull the bezel away from the system.
4 Open the system.
a Loosen the two captive screws at the back of the system.
b While pressing down on the cover indention, slide the cover backward about an inch, and
grasp the cover on both sides.
c Carefully lift the cover away from the system.
5 Remove all of the hard drive carriers in the system.
6 Label the hard drives with their locations in the hard drive bay.
7 Untwist the cable tie that holds the control panel cable and the LED cable together. See
Figure 6-13.
8 Press the release latches inward on each side of the control panel, and carefully slide the
control panel out of the system.
9 Disconnect the control panel cable and the LED cable from the control panel.
D3835bk0.book Page 70 Monday, August 24, 2009 4:34 PM