Dell 745N manual Installing and Removing the Securing Clip Latch

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Figure 6-14. Installing and Removing the Securing Clip

latch rubber-coated tab

securing clips (2)

heat sink

heat-sink posts (4)

processor

10Align the pin-1 corner of the processor with the pin-1 corner of the ZIF socket. See Figure 6-15.

NOTE: Identifying the pin-1 corners is critical to positioning the processor correctly.

Identify the pin-1 corner of the processor by locating the tiny gold triangle on one corner of the processor. Place this corner in the same corner of the ZIF socket identified by a corresponding triangle.

11Install the processor in the socket.

74

Installing System Components