Installing System Components 55
Figure 6-2. Installing and Removing the Cooling Shroud

Installing the Cooling Shroud

1
Insert the two tabs of the cooling shroud into the back panel. See Figure 6-2.
2
Rotate the cooling shroud down until the release latch snaps into place securing the shroud to
the fan assembly.
3
Close the system. See "Closing the System" in "Troubleshooting Your System."

System Battery

Replacing the System Battery

CAUTION: See your System Information Guide for complete information about safety precautions,
working inside the computer, and protecting against electrostatic discharge.
1
Enter the System Setup program and, if possible, make a printed copy of the System Setup
screens.
See "Using the System Setup Program" in the
User's Guide
.
2
Open the system. See "Opening the System" in "Troubleshooting Your System."
3
Remove the cooling shroud. See "Removing the Cooling Shroud."
release latch
cooling shroud tabs
inserted here
cooling shroud
D3835bk0.book Page 55 Monday, August 24, 2009 4:34 PM