62 Installing System Components
www.dell.com | support.dell.com
8
Connect any remaining internal or external cable(s) to the expansion card.
9
If installing a remote access controller, connect the cable to the remote access controller
connector on the system board. See Figure 6-9.
10
Replace the daughter card if it was removed. See "Installing a Daughter Card."
11
Close the system. See "Closing the System" in "Troubleshooting Your System."
Figure 6-7. Installing and Removing Expansion Cards
expansion-card
retainer
expansion card
expansion-card
connector (on riser board)
PCI slot 1
PCI slot 2
D3835bk0.book Page 62 Monday, August 24, 2009 4:34 PM