Installing Drives 83
Figure 7-2. Removing the Hard Drive From the Drive Carrier

Installing a Hard Drive

1
Align the hard-drive mounting holes with the holes in the drive carrier.
2
Using a #2 Phillips screwdriver, install the four screws that secure the hard drive to the carrier.
See Figure 7-2.
3
Align the hard-drive carrier in the hard drive bay of the chassis and slide the carrier forward
until it stops.
4
Push the horizontal bar on the front of the carrier to the upright position.
5
Replace the bezel. See "Removing and Replacing the Bezel" in "Troubleshooting Your
System."
hard drive
hard-drive carrier
#2 Phillips screws (4)
D3835bk0.book Page 83 Monday, August 24, 2009 4:34 PM