24TEST THE SAFETY REVERSE SYSTEM

13

The safety reverse system test is important. Garage door must reverse on contact with a 40mm obstacle l on the floor. Failure to properly adjust opener may result in serious personal injury from a closing g Repeat test once a month and adjust as needed.

Procedure: Place a 40mm obstacle (1) laid flat on the floor under the garage door. Operate the door in the down direc The door must reverse on the obstacle. If the door stops on the obstacle, remove obstacle and repeat Setting Force Steps, then repeat safety reverse test.

When the door reverses on the 40mm obstacle, remove the obstacle and run the opener through a complete travel Door must not reverse in closed position. If it does, repeat Setting the Limits and Force then repeat safety rever

40mm

1

 

 

40mm

1

STANDARD INSTALLATION COMPLETE

25 INSTALL THE PROTECTOR SYSTEM™

(See accessories) SAFETY FIRST!

 

Whilst Chamberlain have engineered safety features into your

 

garage door opener, we urge you to consider fitting IR Beams

 

to your new garage door opener. In many countries these

 

devices are compulsory to prevent serious injury or prop

 

damage. For your own peace of mind and the safety of others

 

please install this inexpensive safety device.

Install this accessory for all installations on tilt doors, doors over 2.5m and when the closing force as

measured on the bottom of the door is over 400N (40kg).

After opener has been installed and adjusted,The Protector System™ accessory can be installed. Instructions

are included with this accessory.

 

The Protector System™ provides an additional measure of safety against a small child being caught

under a garage door. It uses an invisible beam which, when broken by an obstruction, causes a closing door

open and prevents an open door from closingstronglyandrecommendedis for homeowners with young children.

NOTE: The opener will automatically detect the protector system when it is installed. The opener will not close unless the sensors are aligned.

 

 

white/black

 

 

wires twisted

Connecting the Protector System

4. grey

together

Locate the terminals on the back of the unit. Strip all

3. white

 

wires back about 10mm then twist the two white wires

 

 

and the two white/black wires together. Trim the twisted

 

white wires

wires to approximately 6mm. Use a small screwdriver or

 

 

twisted together

pen to hold down the spring terminals, insert the

 

white/black wires into the grey terminal (4), then

 

 

terminate the white (only) wires into the white terminal

 

 

(3).

 

 

Page 13 Page 15
Page 14
Image 14
Chamberlain MT60P manual Test the Safety Reverse System, Install the Protector System
Page 13 Page 15

MT60P specifications

The Chamberlain MT60P is a state-of-the-art garage door opener that combines advanced technology with user-friendly features, making it one of the best choices for homeowners seeking reliability and convenience. This model is designed to cater to various needs while ensuring safety and efficiency.

One of the standout features of the Chamberlain MT60P is its powerful motor, which provides a lifting capacity of up to 600 pounds. This robust operation is suitable for heavy and Michigan weather conditions, delivering consistent performance day in and day out. The durable design ensures longevity, allowing it to handle the rigors of daily use.

The MT60P leverages innovative MyQ technology, which allows users to operate and monitor their garage door remotely through a smartphone app. This feature adds a layer of convenience, enabling users to check whether their garage door is open or closed from anywhere. The app also sends alerts and notifications, providing peace of mind for users concerned about security.

Another notable characteristic of the Chamberlain MT60P is its quiet operation. Equipped with a belt drive system, the opener operates smoothly and silently, making it ideal for homes with bedrooms adjacent to the garage. This feature significantly reduces noise, allowing for a peaceful environment even when the garage door is in use.

Safety is also a top priority for the MT60P. The opener includes safety sensors that detect obstructions in the door's path, reversing the door's direction if anything is detected. This technology helps prevent accidents and protects pets, vehicles, and family members.

Installation of the Chamberlain MT60P is designed to be straightforward, with a user-friendly process that allows homeowners to set it up with minimal effort. Additionally, the garage door opener is compatible with most standard garage doors, enhancing its versatility.

Furthermore, the MT60P comes with two remote controls and a keypad for added accessibility. This feature allows multiple users to access the garage easily, reducing the hassle of forgetting keys or entering codes.

In summary, the Chamberlain MT60P stands out with its advanced motor performance, MyQ technology, quiet operation, and safety features, making it a top choice for garage door openers. Its combination of durability, convenience, and technological innovation addresses modern homeowner needs, ensuring satisfaction for years to come.
Top Page Image Contents