Dell 745N manual Installing Drives, Configuring the Boot Drive, Removing a Hard Drive

Installing Drives

The hard-drive bays provide space for up to four SATA hard drives. The hard drives must be connected to a CERC SATA RAID controller card or SATA daughter card.

Configuring the Boot Drive

The drive or device from which the system boots is determined by the boot order specified in the System Setup program. See "Using the System Setup Program" in your User's Guide. To boot the system from a hard drive or drive array, the drive(s) must be connected to the appropriate controller.

Removing a Hard Drive

CAUTION: See your System Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.

1Remove the bezel. See "Removing and Replacing the Bezel" in "Troubleshooting Your System."

2Pull the release lever to the right and pull down the horizontal bar on the front of the carrier. See Figure 7-1.

Installing Drives

81