Troubleshooting Your System 43
Figure 5-3. Installing and Removing the System Cover

Closing the System

1
Ensure that you did not leave tools or parts inside the system.
2
Place the cover over the sides of the chassis, and slide the cover forward. See Figure 5-3.
3
Tighten the two captive screws at the back of the system to secure the cover.
4
Replace the bezel. See "Removing and Replacing the Bezel."
5
Reconnect the system to the electrical outlet, and turn on the system.
captive screws (2)
system cover cover indention
D3835bk0.book Page 43 Monday, August 24, 2009 4:34 PM