System Board Switches
The following table defines the six switches on the system board. The Open (OFF) position is the default configuration for each switch.
Table
System Board Switches
| Switch | Open (Off) Position | Closed (On) Position |
1 | Video | Enable integrated video | Disable integrated video |
|
|
|
|
2 | Lock | Configuration can be | Configuration can not be |
| Configuration | changed | changed |
|
|
|
|
3 | Rack Mount | System is tower configuration | System is rack mount |
|
|
| configuration |
|
|
|
|
4 | Diskette | Diskette boot is controlled by | Diskette is enabled for booting |
| Override | configuration | regardless of configuration |
|
|
|
|
5 | Password | Power on password is | Power on password is disabled |
| Enable | enabled |
|
|
|
|
|
6 | Maintenance* | NV RAM is valid | NV RAM is invalidated, |
|
|
| configuration is lost |
*See the ProLiant 3000 Service and Maintenance Guide for information on the use of this switch.
Accessing DIMM Sockets on the Memory
Board
1.Remove the memory board as shown in Figure
