Compaq 3000 manual 18Rack-Mount Server Installation

3-18Rack-Mount Server Installation

1.Attach a mounting bracket assembly to the front of the rack first, using one M6 x 1.0-12L Phillips screw in the bottom hole of the bracket. Do not use the washers supplied with the Compaq rack.

IMPORTANT: Use only the bottom hole of the bracket as shown

in Figure 3-10

Figure 3-10.Attaching mounting bracket assembly to the front of the rack

2.Carefully align the mounting bracket assembly with the rear rack frame.

3.Secure the back end of the mounting bracket assembly to the back corner brace of the rack with one M6 x 1.0-12L Phillips screw through the bottom hole of the bracket and the cage nut, as shown in the following figure.