LG Electronics PA65, PA49, PA45 owner manual Lock on

106EXTERNAL CONTROL DEVICE SETUP

09. Tint (Command: k j)	13. Treble (Command: k r)
►► To adjust the screen tint.	►► To adjust treble.
You can also adjust tint in the PICTURE menu.
	You can also adjust treble in the AUDIO menu.

ENGLISH

Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 to Green : 64

*Refer to ‘Real data mapping’. See p.108. Ack [j][ ][Set ID][ ][OK/NG][Data][x]

10.Sharpness (Command: k k)

►► To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 32

*Refer to ‘Real data mapping’. See p.108.

Ack [k][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

►► To select OSD (On Screen Display) on/off when controlling remotely.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 00 : OSD off 01 : OSD on

Ack [l][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

►► To lock the front panel controls on the monitor and remote control.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off 01 : Lock on

Ack [m][ ][Set ID][ ][OK/NG][Data][x]

*If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.

*In the standby mode, if key lock is on, TV will not turn on by power on key of IR & Local Key.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108. Ack [r][ ][Set ID][ ][OK/NG][Data][x]

14.Bass (Command: k s)

►► To adjust bass.

You can also adjust bass in the AUDIO menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108. Ack [s][ ][Set ID][ ][OK/NG][Data][x]

15.Balance (Command: k t)

►► To adjust balance.

You can also adjust balance in the AUDIO menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108. Ack [t][ ][Set ID][ ][OK/NG][Data][x]

16.Colour Temperature (Command: x u)

►► To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu.

Transmission [x][u][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108.

Ack [u][ ][Set ID][ ][OK/NG][Data][x]