LG Electronics PA45, PA49 Using the Pentouch Function, Display Resolution Settings for Pentouch

44PENTOUCH

ENGLISH

Using the Pentouch Function

yyImage shown may differ from your TV.

You need the following items to use the Pentouch functions:

-Computer with RGB or HDMI output

-RGB or HDMI cable

1After connecting the TV and the PC with an RGB cable or an HDMI cable, use the INPUT button on the remote controller and select the input connected to the PC.

2Configure your PC screen by referring to the Display Resolution Setting for Pentouch section. If your PC is a notebook computer, you should configure the video to be displayed only on the TV and not on the PC screen.

3Enter the Pentouch mode on your TV.

-Press‌ INPUT to access the input sources. Or press SETTINGS to access the main menus. Then press the navigation buttons to scroll to Pentouch and press OK.

4Select the correct computer input connection to enter the Pentouch mode.

Select external input connected to PC which installed Pentouch program.

5Use the touch pen or the mouse to start the Pentouch program. Pressing the Touch Home button on the touch pen works in the same way as right-clicking the mouse.

Display Resolution Settings for Pentouch

On a Desktop Computer

In Windows XP

Right-click the desktop and select [Properties]. In the [Display Properties] window, set the screen resolution to 1024 x 768 under the [Settings] tab.

In Windows Vista

Right-click the desktop and select [Personalize] and [Display Settings]. Set the screen resolution to 1024 x 768 in the [Resolution] section.

In Windows 7

Right-click the desktop and select [Screen Resolu- tion]. Set the screen resolution to 1024 x 768 in the [Resolution] section.

On a Laptop Computer

Method 1:

On your laptop, press the "Fn + switch screen" key on the keyboard to display the computer screen on your TV screen, then set the computer’s display resolution to 1024 x 768.

*Note: The switch screen key of the laptop may be subject to change by the manufacturer.

LG	Samsung	HP	Toshiba
Fn+F7	Fn+F4	Fn+F5	Fn+F5
Sony	Acer	Dell	Lenovo
Fn+F7	Fn+ F5	Fn + F8	Fn + F7

NOTE

yyIf you turn off the TV and turn it back on while using the Pentouch function, the last screen on which you were working appears.

yyTo switch from Pentouch mode to others mode, either press the INPUT button on the remote control to select the desired input or press the TV button to return to the TV viewing screen.

Method 2:

Open the control panel for the graphics card on your computer.

Set [Display Mode] to the [Single Display] mode, then select [LG TV] as the display to use.

*Set the computer’s display resolution to 1024 x 768.