LG Electronics PA49, PA65 Aspect Ratio Command k c Main Picture Size, Screen Mute Command k d

EXTERNAL CONTROL DEVICE SETUP 105

01. Power (Command: k a)

►► To control Power On/Off of the set.

Transmission[k][a][ ][Set ID][ ][Data][Cr]

Data 00 : Power Off 01 : Power On

Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To show Power On/Off.

Transmission [k][a][ ][Set ID][ ][FF][Cr]

Ack [a][ ][Set ID][ ][OK/NG][Data][x]

04. Volume Mute (Command: k e)

►► To control volume mute on/off.

You can also adjust mute using the MUTE button on remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 00 : Volume mute on (Volume off)

01: Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x]

*Similarly, if other functions transmit ‘0xFF’ data based on this format, Acknowledgement data feed back presents status about each function.

*OK Ack., Error Ack. and other message may display on the screen when TV is power On.

02.Aspect Ratio (Command: k c) (Main Picture Size)

►► To adjust the screen format. (Main picture format)

You can also adjust the screen format using the Aspect Ratio in the Q.MENU. or PICTURE menu.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Data 01	: Normal screen	09 : Just Scan
	(4:3)	0B : Full Wide
02	: Wide screen (16:9)	10to1F : Cinema Zoom 1to16
06	: Original
07	: 14:9

05. Volume Control (Command: k f)

►► To adjust volume.

You can also adjust volume with the VOLUME but- tons on remote control.

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108. Ack [f][ ][Set ID][ ][OK/NG][Data][x]

06.Contrast (Command: k g)

►► To adjust screen contrast.

You can also adjust contrast in the PICTURE menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108.

ENGLISH

Ack [c][ ][Set ID][ ][OK/NG][Data][x]

* Using the PC input, you select either 16:9 or 4:3 screen aspect ratio.

* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p 50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz / 60 Hz), Component( 720p, 1080i, 1080p 50 Hz / 60 Hz) mode, Just Scan is available.

* Full Wide is supported only for DTV.

03. Screen Mute (Command: k d)

►► To select screen mute on/off.

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 00 : Screen mute off (Picture on) Video mute off

01 : Screen mute on (Picture off)

10 : Video mute on

Ack [d][ ][Set ID][ ][OK/NG][Data][x]

*In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.

Ack [g][ ][Set ID][ ][OK/NG][Data][x]

07. Brightness (Command: k h)

►► To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64

*Refer to ‘Real data mapping’. See p.108.

Ack [h][ ][Set ID][ ][OK/NG][Data][x]

08. Colour (Command: k i)

►► To adjust the screen colour.

You can also adjust colour in the PICTURE menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping’. See p.108.

Ack [i][ ][Set ID][ ][OK/NG][Data][x]