RIDGID R86014 manual Features

FEATURES

PRODUCT SPECIFICATIONS

Chuck	1/2 in. Keyless
Motor	18 Volt DC
Switch	Variable Speed
	HIGH/LOW SPEED
	INDICATORS
	TORQUE
	ADJUSTMENT RING
	KEYLESS
	CHUCK

No Load Speed	0-450/0-1,450 r/min. (RPM)
Clutch	24 Position
Torque	450 in.lb.

AutoShift™

SELECTOR

DIRECTION OF ROTATION

SELECTOR (FORWARD/REVERSE/

CENTER LOCK)

SWITCH

BIT

REVERSE

TRIGGER

LED

LIGHT

STORAGE

FORWARD

Fig. 1

KNOW YOUR DRILL

See Figure 1.

The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

the direction of bit rotation. Setting the direction of rotation selector in the OFF (center lock) position will lock the switch trigger to help reduce the possibility of accidental starting when not in use.

KEYLESS CHUCK

The keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.

AutoShift™

When you select AutoShift™, your drill will automatically shift to low speed when it senses more torque is required for the application.

BIT STORAGE

Bits provided with the drill can be placed in the storage area, located on the base of the drill.

LED LIGHT

The LED light located on the front of the tool base illuminates when the switch trigger is depressed.

TORQUE ADJUSTMENT RING

Your drill has a 24-position clutch. The torque adjustment ring can be turned to select the right amount of torque for your application.

DIRECTION OF ROTATION SELECTOR

(FORWARD/REVERSE/CENTER LOCK)

Your drill has a direction of rotation (forward/reverse/center lock) selector located above the switch trigger for changing

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.