RIDGID WD1450 owner manual Wet/Dry Vac Assembly, Insert Hose

SP6542 14 Gallon 9/7/04 1:31 PM Page 9

Wet/Dry Vac Assembly

1.Position the powerhead assembly on the drum/caster foot assembly as shown (assembled earlier).

2.Rotate both latches down and press until you hear them snap over the flanges on the drum.

Insert Hose

Insert the push button end of the “Tug-A- Long” hose into the inlet of the vac. The hose should snap into place. To remove the hose from the vac, press the release button in the hose assembly and pull the hose out of the vac inlet, as shown.

Drum	Drum	Press
Latch	Latch	and
		Pull
	Drum
	Flange	Release
		Button

Powerhead

Assembly

Latch

Drum

9