NordicTrack NTC3015.0 user manual Assembly

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires the included tools and your own adjustable wrench and Phillips screw-

driver .

Use the part drawings below to identify the small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 22. The number following the paren- theses is the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M8 Nylon	M10 Nylon	M8 Split		M10 Split		6.35mm		Curved
Locknut (79)–4	Locknut (65)–2	Washer (55)–14		Washer (71)–8		Spacer (62)—4		Spacer (76)—4
M4 x 16mm	M4 x 16mm		M4 x 22mm
	Round Head				M6 x 8mm Button		M8 x 22mm Button
Screw (57)–6	Screw (80)–4		Screw (60)–2		Screw (59)–2			Screw (54)–6
	M8 x 54mm Button				M10 x 54mm Button
	Screw (52)–4					Screw (56)–4
			M10 x 97mm Button Screw (77)–4

5