USB COMMUNICATIONS
This device conforms to the USB specification revision 2.0. This device also conforms with the Human Interface Device (HID) class specification version 1.1. The device communicates to the host as a vendor defined HID device. The details about how the relay status and commands are structured into HID reports follow later in this section.
It is strongly recommended that application software developers become familiar with the HID specification and the USB specification before attempting to communicate with this device. This document assumes that the reader is familiar with these specifications. These specifications can be downloaded free from www.usb.org
.
This is a full speed USB device. This device has a number of programmable configuration properties. These properties are stored in
The device does not support remote wakeup.
This device is powered from the USB bus. Its vendor ID is 0x0801 and its product ID is 0x008C
DEVICE DESCRIPTOR
Item | Value(Hex) |
bLength | 12 |
bDescriptorType = Device | 01 |
bcdUSB = version 2.0 | 0200 |
bDeviceClass = in Interface Descriptor | 00 |
bDeviceSubClass | 00 |
bDeviceProtocol | 00 |
bMaxPacketSize | 08 |
idVendor | 0801 |
idProduct | 008C |
bcdDevice = 1.00 | 0100 |
iManufacturer | 01 |
iProduct | 02 |
iSerialNumber | 00 |
bNumConfigurations | 01 |
3
