– 21 –
FITTING UNIT
4. Secure with plastic tie as shown below.
When servicing unit replace plastic tie with new
one.
(Available at local hardware store or contact
local distrilbutor.)
1. Fix Flue Adapter to Flue
Manifold with PIPE STOPPER S
as shown below.
3. Fit Air inlet Hose to heater. Fix Side
Back Spacers with screws.
Air lnlet Hose
Connect Air Inlet Hose to Manifold
lnlet.
Do not kink the hose.
2. Fit Wall bracket as shown below. 5. Connect Vent Sliding Tube with
PIPE STOPPER S and E as shown beIow.
Sliding Tube should not be extended beyond
the RED LINE.
Red line should not be visible after sliding the
tube back into the vent outlet.
Inlet hose
Inlet elbow
Plastic tie
Pipe stopper S
Flue Manifold
Flue Adapter
FILTER
Flexible Plactic Hose (C)
BA
FLUE MANIFOLD
Pipe “A” - Swivels for location adjustment
Pipe “B” - Telescopic-telescopes into pipe A and flue manifold
Pipe “C” - Fits on manifold “Air Intake” pipe
Screw Sliding Tube
PIPE STOPPER S
PIPE STOPPER A
Flue Manifold
PIPE STOPPER E
Red line
FILTER