From Furnace |
| G | STEP 1 - Connect the G wire to the G |
| |
and | AC unit |
| terminal on the thermostat. |
| |
|
|
| |||
|
|
|
| ||
|
|
|
|
| |
|
|
| Y | This connects the Fan. | jumper |
|
| O | wire | ||
|
|
| STEP 2 - Add a jumper wire | ||
|
|
|
| ||
|
| or |
|
| |
|
| B |
| between W and Y. |
|
|
|
|
|
| |
| R |
|
| STEP 3 - Connect the Y wire to the | O or B |
C |
|
| Y terminal on the thermostat. | ||
|
|
| |||
|
|
|
|
|
This connects the Compressor.
STEP 4 - Connect the O or B wire to the O or B terminal | C | |
24VAC | ||
on the thermostat. (If you have both O and B contact | ||
Power | ||
Ritetemp or your local HVAC contractor for further help) |
| |
This connects the change over valve. |
|
STEP 5 - Connect the R wire to the RC terminal on the Thermostat. This connects to the 24vac power.
Your HVAC system is now connected to the thermostat.
Thermostat
A
jumper wire
Y G
Comp FAN
Return To Page 7
PG 15 | NOTE: Wires marked with the dotted line are optional. |
8022C Features
The 8022C can be used with most 24 volt gas, oil or electric heating and air conditioning systems, single- stage heat pumps or gas millivolt heating systems. It cannot be used with 120 volt heating systems or multistage heat pumps. Ask The Home Depot for other thermostats to control those systems.
The 8022C is programmable. There are four programming periods per day. Each period can be programmed separately.
You can use the
The 8022C separately programs 7 days a Week and a Spacial
Day - for both heating and cooling.
OFF
HEAT
COOL
FAN | ON |
AUTO
You can easily override the programmed temperatures for as little as one programming period or for an entire vacation.
A large liquid crystal display shows time, day of the week, room and set temperatures. It will also remind you when the filter
| should be changed in your blower. | |
| Temperature swing adjustment lets you | |
| efficiency. | |
| A | |
PG 16 | Two "AA" batteries (not included) are used to retain your time and temperature programs, and to | |
run the thermostat. | ||
|